ISO 9001:2015 Certified | Cage Code: 7L0f6
TYPICAL PROPERTIES of CELAZOLE T-POLYMERS |
|||||
| ASTM or UL test | Property | TU-60 unfilled |
TL-60 lubricated |
TF-60V glass-filled |
TF-60C carbon-filled |
| PHYSICAL | |||||
| D792 | Density (lb/in³) (g/cm³) |
0.047 1.30 |
0.052 1.43 |
0.055 1.51 |
0.051 1.41 |
| D570 | Water Absorption, saturation (%) | 6.5 | 3.8 | 4.6 | 3.8 |
| MECHANICAL | |||||
| ISO 527 | Tensile Strength (psi) | 14,000 | 16,000 | 26,000 | 35,000 |
| ISO 527 | Tensile Modulus (psi) | 710,000 | 2,300,000 | 2,000,000 | 3,500,000 |
| ISO 527 | Tensile Elongation at Break (%) | 2.2 | 1.1 | 1.6 | 1.5 |
| ISO 178 | Flexural Strength (psi) | 26,000 | 23,000 | 40,000 | 50,000 |
| ISO 178 | Flexural Modulus (psi) | 710,000 | 2,000,000 | 2,000,000 | 3,200,000 |
| – | Compressive Strength (psi) | 30,000 | – | – | – |
| D695 | Compressive Modulus (psi) | 430,000 | – | – | – |
| D785 | Hardness, Rockwell | A 25 | – | – | – |
| ISO 180 | IZOD Notched Impact (ft-lb/in) | 1.9 | 1.7 | 2.4 | 2.4 |
| THERMAL | |||||
| D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) 75-300°F 390-570°F |
1.9 3.4 |
– | – | – |
| D648 | Heat Deflection Temp (°F / °C) at 264 psi |
581 / 305 | – / – | – / – | – / – |
| – | Max Operating Temp (°F / °C) | – / – | – / – | – / – | – / – |
| ELECTRICAL | |||||
| D149 | Dielectric Strength (V/mil) short time, 1/8″ thick | 433 | – | – | – |
| D150 | Dielectric Constant at 10 kHz | 3.4 | – | – | – |
| D150 | Dissipation Factor at 10 kHz | 0.001 | – | – | – |
| D495 | Arc Resistance (seconds) | 135 | – | – | – |
| D257 | Volume Resistivity (ohm-cm) at 50% RH | 2 x 1016 | – | – | – |
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets.