ISO 9001:2015 Certified | Cage Code: 7L0f6
TYPICAL PROPERTIES of CIP COMPOSITES(NOTE: Tests performed on CIP Series 100 sheet material.) |
||
| ASTM or UL test | Property | CIP Composites |
| PHYSICAL | ||
| D792 | Density (lb/in³) (g/cm³) |
0.045 1.25 |
| D570 | Water Absorption, 24 hrs (%) | < 0.1 |
| MECHANICAL | ||
| D638 | Tensile Strength (psi) | 10,000 |
| D638 | Tensile Modulus (psi) | 470,000 |
| D638 | Tensile Elongation at Break (%) | – |
| D790 | Flexural Strength (psi) | – |
| D790 | Flexural Modulus (psi) | 260,000 |
| D695 | Compressive Strength, Breaking (psi) perpendicular to laminate parallel to laminate |
50,000 13,500 |
| D695 | Compressive Modulus (psi) | – |
| D785 | Hardness, Rockwell | M100 |
| D256 | IZOD Notched Impact (ft-lb/in) | – |
| THERMAL | ||
| D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) Series 100 & 200 – normal to laminate (dia) Series 100 & 200 – parallel to length Series 300 – normal to laminate (dia) Series 300 – parallel to length |
6.7 3.8 2.8 1.6 |
| D648 | Heat Deflection Temp (°F / °C) at 264 psi |
– |
| – | Max Operating Temp (°F / °C) Series 100 & 200 Series 300 |
200 / 93 400 / 204 |
| C177 | Thermal Conductivity (BTU-in/ft²-hr-°F) (x 10-4 cal/cm-sec-°C) |
– – |
| UL94 | Flammability Rating (2 mm thickness) | – |
| ELECTRICAL | ||
| D149-97a (2004) | Dielectric Strength (V/mm) | 200 |
| D257-07 | Volume Resistivity (ohm-cm)at 50% RH | 4.2 x 1015 |
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets.