ISO 9001:2015 Certified | Cage Code: 7L0f6

TYPICAL PROPERTIES of Duratron® T5530 30% Glass Filled

ASTM or UL TEST PROPERTY
ASTM or UL test Property Torlon® 5530
Glass-Filled
PHYSICAL
D792 Density (lb/in³)
(g/cm³)
0.059
1.61
D570 Water Absorption, 24 hrs (%) 0.3
MECHANICAL
D638 Tensile Strength (psi) 15,000
D638 Tensile Modulus (psi) 900,000
D638 Tensile Elongation at Break (%) 3
D790 Flexural Strength (psi) 20,000
D790 Flexural Modulus (psi) 900,000
D695 Compressive Strength (psi) 27,000
D695 Compressive Modulus (psi) 600,000
D785 Hardness, Rockwell E85(M125)
D256 IZOD Notched Impact (ft-lb/in) 0.7
THERMAL
D696 Coefficient of Linear Thermal Expansion
(x 10-5 in./in./°F)
2.6
D648 Heat Deflection Temp (°F / °C)
at 264 psi
520 / 271
D3418 Glass Transition Temp (°F / °C) 527 / 275
Max Operating Temp (°F / °C) 500 / 260
C177 Thermal Conductivity
(BTU-in/ft²-hr-°F)
(x 10-4 cal/cm-sec-°C)
2.50
8.61
UL94 Flammability Rating V-0
ELECTRICAL
D149 Dielectric Strength (V/mil) short time, 1/8″ thick 700
D150 Dielectric Constant at 1 MHz 6.3
D150 Dissipation Factor at 1 MHz 0.022
D257 Volume Resistivity (ohm-cm)at 50% RH > 1013

NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets.