ISO 9001:2015 Certified | Cage Code: 7L0f6
TYPICAL PROPERTIES of HYDEX® 4101 PBT-P |
|||
| ASTM or UL test | Property | Hydex® 4101 | Hydex® 4101L |
| PHYSICAL | |||
| D792 | Density (lb/in³) (g/cm³) |
0.047 1.31 |
0.049 1.36 |
| D570 | Water Absorption, 24 hrs (%) | 0.07 | 0.07 |
| MECHANICAL | |||
| D638 | Tensile Strength (psi) | 9,400 | 7,200 |
| D638 | Tensile Modulus (psi) | 425,000 | 380,000 |
| D638 | Tensile Elongation at Break (%) | 50 | 40 |
| D790 | Flexural Strength (psi) | 11,600 | 10,600 |
| D790 | Flexural Modulus (psi) | 420,000 | 390,000 |
| D695 | Compressive Strength (psi) | 11,000 | 11,000 |
| D695 | Compressive Modulus (psi) | – | – |
| D785 | Hardness, Rockwell | R120 | R110 |
| D256 | IZOD Notched Impact (ft-lb/in) | 0.7 | 0.7 |
| THERMAL | |||
| D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) |
4.5 | 5.0 |
| D648 | Heat Deflection Temp (°F / °C) at 264 psi |
200 / 93 | 195 / 89 |
| D3418 | Melting Temperature (°F / °C) | 420 / 215 | 420 / 215 |
| – | Max Operating Temp (°F / °C) | 221 / 105 | 221 / 105 |
| C177 | Thermal Conductivity (BTU-in/ft²-hr-°F) (x 10-4 cal/cm-sec-°C) |
– – |
– – |
| UL94 | Flammability Rating | HB | HB |
| ELECTRICAL | |||
| D149 | Dielectric Strength (V/mil) short time, 1/8″ thick | 410 | – |
| D150 | Dielectric Constant at 60 Hz | 3.3 | – |
| D150 | Dissipation Factor at 60 Hz | 0.002 | – |
| D257 | Volume Resistivity (ohm-cm)at 50% RH | 4.5 x 1016 | – |
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets.