ISO 9001:2015 Certified | Cage Code: 7L0f6
TYPICAL PROPERTIES of VESPEL® SP-1 UNFILLED |
||
| ASTM or UL test | Property | SP-1 |
| – | Filler Material | Unfilled |
| PHYSICAL | ||
| D792 | Density (lb/in³) (g/cm³) |
0.051 1.43 |
| D570 | Water Absorption, 24 hrs @ 73°F (%) 48 hrs @ 122°F (%) |
0.24 0.72 |
| MECHANICAL | ||
| D638 | Tensile Strength, Ultimate @ 73°F (psi) @ 500°F (psi) |
12,500 6,000 |
| D638 | Tensile Modulus (psi) | – |
| D638 | Tensile Elongation, Ultimate @ 73°F (%) @ 500°F (%) |
7.5 6.0 |
| D790 | Flexural Strength, Ultimate @ 73°F (psi) @ 500°F (psi) |
16,000 9,000 |
| D790 | Flexural Modulus @ 73°F (psi) @ 500°F (psi) |
450,000 250,000 |
| D695 | Compressive Strength, 10% strain @ 73°F (psi) | 19,300 |
| D695 | Compressive Modulus (psi) | 350,000 |
| D785 | Hardness, Rockwell | E45-60 |
| D256 | IZOD Notched Impact (ft-lb/in) | 0.8 |
| Poisson’s Ratio | 0.4 | |
| THERMAL | ||
| D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) |
3.0 |
| D648 | Heat Deflection Temp (°F / °C) at 264 psi |
680 / 360 |
| – | Max Continuous Operating Temp (°F / °C) | 500 / 260 |
| C177 | Thermal Conductivity (BTU-in/ft²-hr-°F) (x 10-4 cal/cm-sec-°C) |
2.0 6.9 |
| UL94 | Flammability Rating | V-0 |
| ELECTRICAL | ||
| D149 | Dielectric Strength (V/mil) short time, 1/8″ thick | 560 |
| D150 | Dielectric Constant at 1 MHz | 3.55 |
| D150 | Dissipation Factor at 1 MHz | 0.0034 |
| D257 | Volume Resistivity (ohm-cm)at 50% RH | 1014 – 1015 |