ISO 9001:2015 Certified | Cage Code: 7L0f6
TYPICAL PROPERTIES of CELAZOLE PBI |
||
| ASTM or UL test | Property | Celazole® PBI |
| PHYSICAL | ||
| D792 | Density (lb/in³) (g/cm³) |
0.047 1.30 |
| D570(2) | Water Absorption, 24 hrs, Immersion (%) | 0.40 |
| D570(2) | Water Absorption, Saturation, Immersion (%) | 5.0 |
| MECHANICAL | ||
| D638 | Tensile Strength (psi) @ 150°F (65°C) | 16,000 |
| D638 | Tensile Strength (psi) @ 300°F (150°C) | 12,000 |
| D638 | Tensile Modulus (psi) | 850,000 |
| D638 | Tensile Elongation at Break (%) | 2.0 |
| D790 | Flexural Strength (psi) | 32,000 |
| D790 | Flexural Modulus (psi) | 950,000 |
| D695 | Compressive Strength (psi) (10% def.) | 50,000 |
| D695 | Compressive Modulus (psi) | 900,000 |
| D785 | Hardness, Rockwell | M125 / E105 |
| D2240 | Hardness, Shore D | 94 |
| D256, Type A | IZOD Notched Impact (ft-lb/in) | 0.5 |
| QTM 55007 | Coefficient of Friction (Dry vs. Steel) Dynamic | 0.24 |
| QTM 55007 | Limiting PV (4:1 Safety Factor) (psi-ft/min | 37,500 |
| QTM 55010 | Wear Factor “K” x 10-10(in3-min/ft-lb-hr | 60 |
| THERMAL | ||
| E831 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) @ Temperature -40 to 300 °F |
1.3 |
| D648 | Heat Deflection Temp (°F / °C) at 264 psi |
800 / 427 |
| D3418 | Glass Transition Temp (°F / °C) | 775 / 413 |
| – | Max Service Temp (°F / °C) (long term) | 600 / 316 |
| F433 | Thermal Conductivity (BTU-in/ft²-hr-°F) W/m-°K) |
2.8 0.403 |
| UL94 | Flammability Rating (1/8 inch, estimated rating) | V-0 |
| ELECTRICAL | ||
| D149 | Dielectric Strength (V/mil) short time, 1/8″ thick | 550 |
| D150 | Dielectric Constant at 1 MHz | 3.2 |
| D150 | Dissipation Factor at 1 MHz | 0.0030 |
| EOS/ESD S11.11 | Surface Resistivity (ohms/square) | > 1013 |
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets.