ISO 9001:2015 Certified | Cage Code: 7L0f6
TYPICAL PROPERTIES of NORYL® Modified PPO |
|||
| ASTM or UL test | Property | Unfilled | 30% Glass-filled |
| PHYSICAL | |||
| D792 | Density (lb/in³) (g/cm³) |
0.039 1.08 |
0.049 1.36 |
| D570 | Water Absorption, 24 hrs (%) | 0.07 | 0.06 |
| MECHANICAL | |||
| D638 | Tensile Strength (psi) | 9,600 | 17,800 |
| D638 | Tensile Modulus (psi) | 350,000 | – |
| D638 | Tensile Elongation at Break (%) | 30 | – |
| D790 | Flexural Strength (psi) | 13,500 | 20,000 |
| D790 | Flexural Modulus (psi) | 360,000 | 1,100,000 |
| D695 | Compressive Strength (psi) | – | – |
| D695 | Compressive Modulus (psi) | – | – |
| D785 | Hardness, Rockwell | R119 | L108 |
| D256 | IZOD Notched Impact (ft-lb/in) | 5.0 | 2.3 |
| THERMAL | |||
| D696 | Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) |
3.3 | 1.4 |
| D648 | Heat Deflection Temp (°F / °C) at 264 psi |
265 / 129 | 275 / 135 |
| D3418 | Vicat Softening Temp (°F / °C) | 310 / 154 | – / – |
| – | Max Operating Temp (°F / °C) | 220 / 105 | 220 / 105 |
| C177 | Thermal Conductivity (BTU-in/ft²-hr-°F) (x 10-4 cal/cm-sec-°C) |
1.32 4.55 |
1.94 6.68 |
| UL94 | Flammability Rating (1/4″ thick) | V-0 | V-0 |
| ELECTRICAL | |||
| D149 | Dielectric Strength (V/mil) short time, 1/8″ thick | 500 | 530 |
| D150 | Dielectric Constant at 60 Hz | 2.7 | 3.2 |
| D150 | Dissipation Factor at 60 Hz | 0.001 | 0.002 |
| D257 | Volume Resistivity (ohm-cm)at 50% RH | 1017 | 1017 |
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets.